Credit Course Schedules

Mechanical Technology - Fall 2022

In Person
Classes meet in person on campus; specific days/times/location
Online - Asynchronous
Classes meet fully online; no specific days/times/locations
Online - Synchronous (Zoom)
Classes meet via Zoom or other resource; specific days/times
Hybrid - Online Asynchronous & Online Synchronous (Zoom)
A portion of the classes meet synchronous via Zoom or other resource and a portion is asynchronous online; there will be some specific days/times
Hybrid - Online & In-person
A portion of the classes meet in person on campus and a portion is asynchronous or synchronous online; there will be some specific days/times/locations
Hybrid - Online Asynchronous & In Person
Classes meet in both asynchronous online and in-person modes; specific meeting times and locations for in-person portions of classes are listed with each course
Hybrid - Online Synchronous (Zoom) & In Person
Classes meet in both synchronous online (Zoom) and in-person modes; specific meeting times and locations are listed with each course
Engineering Drawing w/AutoCAD — 3301
MCT 1240 – 4 credits
Jeff P. Teluk

Students will focus on engineering drawing fundamentals, incorporating both manual and computer-aided drafting. Topics include free-hand sketching, principles of applied geometry, orthographic projections, dimensioning, section views, pictorials, conventional drawing practices, standards, tolerancing, and an introduction to 2-D wire frame software such as AutoCAD. Students will create and modify CAD geometry, text, and dimensions. No requisites. J fall. Master Course Syllabus

Jamestown Campus
Manufacturing Technology Institute - Jamestown 132
Aug 22 – Dec 16 Tue, Thu 8:00 am – 9:45 am
Engineering Drawing w/AutoCAD — 3389
MCT 1240 – 4 credits
Timothy R. Griffin

Students will focus on engineering drawing fundamentals, incorporating both manual and computer-aided drafting. Topics include free-hand sketching, principles of applied geometry, orthographic projections, dimensioning, section views, pictorials, conventional drawing practices, standards, tolerancing, and an introduction to 2-D wire frame software such as AutoCAD. Students will create and modify CAD geometry, text, and dimensions. No requisites. J fall. Master Course Syllabus

Cattaraugus County Campus
Manufacturing Technology Institute - Cattaraugus County 111
Aug 22 – Dec 16 Tue, Thu 1:30 pm – 3:10 pm
Statics for Technology — 3778
MCT 1250 – 3 credits
Timothy W. Piazza

Students will study rigid body mechanics including forces, force systems, their resultants, and conditions for equilibrium (including friction). Topics include equivalent force systems, equilibrium of rigid bodies, and structural mechanics (trusses, frames, beams, properties of areas, and volumes). Prerequisite: PHY 1250; Prerequisite/Corequisite: MAT 1590 or higher. J spring. Master Course Syllabus

Jamestown Campus
Manufacturing Technology Institute - Jamestown 132
Aug 22 – Dec 16 Mon, Wed 8:00 am – 9:15 am
Machine Theory and Operations — 3302
MCT 1270 – 3 credits
Jeff P. Teluk

Students will learn the function and operation of basic chip producing machine tools such as lathes, drill, milling machines, saws, and grinders.Eligibility: MAT 1210 or higher. J fall. Master Course Syllabus

Jamestown Campus
Fees: $20
Manufacturing Technology Institute - Jamestown 125
Aug 22 – Dec 16 Wed 1:30 pm – 5:30 pm
Machine Theory and Operations — 3390
MCT 1270 – 3 credits
Timothy R. Griffin

Students will learn the function and operation of basic chip producing machine tools such as lathes, drill, milling machines, saws, and grinders.Eligibility: MAT 1210 or higher. J fall. Master Course Syllabus

Cattaraugus County Campus
Fees: $20
Manufacturing Technology Institute - Cattaraugus County 111
Aug 22 – Dec 16 Fri 8:00 am – 12:00 pm
Industrial Safety & Quality — 3303
MCT 1310 – 2 credits
Scott A. VanStee

Students will learn the safety habits and quality control practices necessary within typical industrial settings. This course will cover knowledge needed to successfully complete a national certification test on safety and quality offered through the Manufacturing Skills Standards Council (MSSC). No requisites. J spring; C spring. Master Course Syllabus

Fees: $220
Aug 22 – Oct 13 TBD
Production Processes & Mainten — 3304
MCT 1320 – 2 credits
Scott A. VanStee

Students will learn the basics or production processes and the operational maintenance operations within typical industrial settings. This course will cover knowledge needed to successfully complete a national certification test on production and maintenance offered through the Manufacturing Skills Standards Council (MSSC). Prerequisite: MCT 1310. J spring; C spring. Master Course Syllabus

Fees: $220
Oct 14 – Dec 16 TBD
Introduction to Solid Modeling — 3308
MCT 1380 – 3 credits
Richard J. Fontes

Students will be introduced to 3-D solid modeling software. Much of the course is spent on application of a parametric solid modeler such as Solid Works. Students will learn to create and sketch geometry and parametric solids. Students will also be introduced to detailing and assembly modeling. Emphasis is placed on establishing constraints that correctly convey the design intent. Prerequisite or Corequisite: MCT 1240. J spring. Master Course Syllabus

Fees: $25
Aug 22 – Dec 16 Mon 6:00 pm – 8:45 pm
Mechanical Drives — 3477
MCT 2210 – 3 credits
Jeff P. Teluk

Students will learn the basics of mechanical power transmission systems and the relevant components. The students will gain basic understanding of basic functions and properties of mechanical systems and safe operational requirements. Troubleshooting techniques are introduced for performing preventative maintenance, as well as identifying and resolving mechanical failures. Prerequisite/Corequisite: ENG 1510; Prerequisite: MAT 1220 or MAT 1590. J occasionally; C occasionally. Master Course Syllabus

Jamestown Campus
Manufacturing Technology Institute - Jamestown 125
Aug 22 – Dec 16 Wed 8:00 am – 12:00 pm
Mechanics of Energy Systems — 3310
MCT 2270 – 4 credits
Timothy W. Piazza

Students will analyze and solve problems involving thermodynamic systems. Students will study thermodynamic processes, including cycles. Applications will focus on fluid dynamics and energy conservation, and heat transfer. Prerequisite: PHY 1250. J spring. Master Course Syllabus

Jamestown Campus
Sheldon Center 135
Aug 22 – Dec 16 Mon, Wed 3:00 pm – 4:15 pm
Mech of Energy Systems Lab — 3311
MCT 2270 – 0 credits
Timothy W. Piazza

Students will analyze and solve problems involving thermodynamic systems. Students will study thermodynamic processes, including cycles. Applications will focus on fluid dynamics and energy conservation, and heat transfer. Prerequisite: PHY 1250. J spring. Master Course Syllabus

Jamestown Campus
Fees: $20
Sheldon Center 135
Aug 22 – Dec 16 Fri 12:30 pm – 3:15 pm
Advanced CNC Programming — 3312
MCT 2280 – 3 credits
Madi Rathinavelu

Students will continue learning computer numerically control (CNC) programming, but move into advanced programming of three, four, and five-axis CNC machines. CAD/CAM is introduced and illustrated. Students will be exposed to Fanuc and Haas controllers. Prerequisites: MCT 1280 and MAT 1220, or MAT 1590 or higher. Master Course Syllabus

Jamestown Campus
Fees: $20
Manufacturing Technology Institute - Jamestown 132
Aug 22 – Dec 16 Wed 5:45 pm – 9:45 pm
Machine Tool Tech. III — 3313
MCT 2300 – 3 credits
James A. Heinrich

Students will gain additional exposure in setting up and running CNC machine tools such as lathes, mills, and EDM equipment. Students will concentrate on the set-up and machining utilizing CNC programs of more complex parts using the CNC equipment. Prerequisites: MCT 1300 and MAT 1220, or MAT 1590 or higher. Master Course Syllabus

Jamestown Campus
Manufacturing Technology Institute - Jamestown 125
Aug 22 – Dec 16 Mon 5:45 pm – 6:35 pm
Machine Tool Tech. III - Lab — 3314
MCT 2300 – 0 credits
James A. Heinrich

Students will gain additional exposure in setting up and running CNC machine tools such as lathes, mills, and EDM equipment. Students will concentrate on the set-up and machining utilizing CNC programs of more complex parts using the CNC equipment. Prerequisites: MCT 1300 and MAT 1220, or MAT 1590 or higher. Master Course Syllabus

Jamestown Campus
Fees: $20
Manufacturing Technology Institute - Jamestown 125
Aug 22 – Dec 16 Sat 9:30 am – 12:15 pm
Manufacturing Technology Institute - Jamestown 125
Aug 22 – Dec 16 Mon 6:45 pm – 9:30 pm
Dimensional Metrology — 3315
MCT 2340 – 2 credits
James A. Heinrich

Studies gain exposure to basic and state of the art requirements for inspection and measurement of machined parts and assemblies. Students will be introduced to the various types of inspection equipment. The students will also have hands-on exposure to metrology via a CMM (Coordinate Measurement Machine) and an optical comparator. Students will hear of state of the art advances in measurement techniques from industry representatives. No requisites. J fall. Master Course Syllabus

Jamestown Campus
Fees: $20
Manufacturing Technology Institute - Jamestown 125
Aug 22 – Dec 16 Fri 1:30 pm – 3:15 pm
Dimensional Metrology — 3393
MCT 2340 – 2 credits
James M. Hilyer

Studies gain exposure to basic and state of the art requirements for inspection and measurement of machined parts and assemblies. Students will be introduced to the various types of inspection equipment. The students will also have hands-on exposure to metrology via a CMM (Coordinate Measurement Machine) and an optical comparator. Students will hear of state of the art advances in measurement techniques from industry representatives. No requisites. J fall. Master Course Syllabus

Cattaraugus County Campus
Fees: $20
Manufacturing Technology Institute - Cattaraugus County 111
Aug 22 – Dec 16 Tue 6:00 pm – 8:45 pm