Credit Course Schedules

Mechanical Technology - Spring 2022

In Person
Classes meet in person on campus; specific days/times/location
Online - Asynchronous
Classes meet fully online; no specific days/times/locations
Online - Synchronous (Zoom)
Classes meet via Zoom or other resource; specific days/times
Hybrid - Online Asynchronous & Online Synchronous (Zoom)
A portion of the classes meet synchronous via Zoom or other resource and a portion is asynchronous online; there will be some specific days/times
Hybrid - Online & In-person
A portion of the classes meet in person on campus and a portion is asynchronous or synchronous online; there will be some specific days/times/locations
Hybrid - Online Asynchronous & In Person
Classes meet in both asynchronous online and in-person modes; specific meeting times and locations for in-person portions of classes are listed with each course
Hybrid - Online Synchronous (Zoom) & In Person
Classes meet in both synchronous online (Zoom) and in-person modes; specific meeting times and locations are listed with each course
Applied Pneumatics&Hydraulics — 3544
MCT 1210 – 3 credits
James L. Weaver

Students will be introduced to the basics of hydraulic and pneumatic machinery. They will study the basic components of these systems, such as pumps, valves, and actuators. This course will include a combination of laboratory activities and computer-based simulations. Students will also discuss safety standards for pneumatic and hydraulic systems. No requisites. J spring. Master Course Syllabus

Jamestown Campus
Fees: $20
Manufacturing Technology Institute - Jamestown 125
Jan 20 – May 13 Thu 1:15 pm – 5:15 pm
Engineering Drawing w/AutoCAD — 3543
MCT 1240 – 4 credits
Timothy R. Griffin

Students will focus on engineering drawing fundamentals, incorporating both manual and computer-aided drafting. Topics include free-hand sketching, principles of applied geometry, orthographic projections, dimensioning, section views, pictorials, conventional drawing practices, standards, tolerancing, and an introduction to 2-D wire frame software such as AutoCAD. Students will create and modify CAD geometry, text, and dimensions. No requisites. J fall. Master Course Syllabus

Jamestown Campus
Manufacturing Technology Institute - Jamestown 132
Jan 19 – May 13 Mon, Wed 2:40 pm – 4:20 pm
CNC/Machine Tools — 3546
MCT 1280 – 3 credits
Jeff P. Teluk

Students will learn the programming and operation of Computer Numerically Controlled (CNC) machine tools. Manual programming of two and three axis mills and lathes using canned cycles will be covered. Topics discussed will include CNC machine components, absolute and incremental programming, preparatory functions (G-codes), miscellaneous functions (M codes), work piece offsets, tool length offsets, cutter compensation and cutting tools and workholding methods for CNC. Lab projects provide hands-on experience for students on CNC controllers. Prerequisite: MCT 1270. J spring. Master Course Syllabus

Jamestown Campus
Fees: $20
Manufacturing Technology Institute - Jamestown 132
Jan 18 – May 13 Tue 1:15 pm – 5:15 pm
Machine Tool Tech. II — 3547
MCT 1300 – 3 credits
Jeff P. Teluk

Students will gain exposure to setting up and running manual machine tools such as lathes, mills, and drill presses. In this course, the students will concentrate on more hands-on applications of set-up and machining of more complex parts using the manual equipment in the MTI lab. Prerequisites: MCT 1240, 1270; Eligibility: MAT 1210 or higher. J spring. Master Course Syllabus

Jamestown Campus
Manufacturing Technology Institute - Jamestown 125
Jan 18 – May 13 Tue, Thu 8:00 am – 8:25 am
Machine Tool Tech. II-LAB — 3548
MCT 1300 – 0 credits
Jeff P. Teluk

Students will gain exposure to setting up and running manual machine tools such as lathes, mills, and drill presses. In this course, the students will concentrate on more hands-on applications of set-up and machining of more complex parts using the manual equipment in the MTI lab. Prerequisites: MCT 1240, 1270; Eligibility: MAT 1210 or higher. J spring. Master Course Syllabus

Jamestown Campus
Fees: $20
Manufacturing Technology Institute - Jamestown 125
Jan 18 – May 13 Tue, Thu 8:30 am – 11:15 am
Manufacturing Drawings & GD&T — 3549
MCT 1340 – 4 credits
Timothy R. Griffin

Students will gain further exposure to actual manufacturing drawings and other information provided. The first part of the course will cover the ability to read, interpret, and construct manufacturing drawings. The second part will introduce the students to geometric tolerance and dimensioning. Prerequisite: MCT 1240; Eligibility: MAT 1210 or higher.. J spring. Master Course Syllabus

Jamestown Campus
Fees: $20
Manufacturing Technology Institute - Jamestown 132
Jan 19 – May 13 Mon, Wed 10:15 am – 11:55 am
Technology Internship I — 3550
MCT 2010 – 3 credits
Jeff P. Teluk

Students receive on-the-job experience consisting of 135 hours of supervised activity in a local business or industry. Students work in conjunction with a faculty mentor and a supervisor at the job site. All guidelines in the original college internship policy will be followed. Prerequisite: completion of at least 12 college-level credits with a GPA of 2.0 or better. J occasionally. Master Course Syllabus

Jamestown Campus
Manufacturing Technology Institute - Jamestown
Jan 18 – May 13 TBD
Mechanical Drives — 3578
MCT 2210 – 3 credits
Jeff P. Teluk

Students will learn the basics of mechanical power transmission systems and the relevant components. The students will gain basic understanding of basic functions and properties of mechanical systems and safe operational requirements. Troubleshooting techniques are introduced for performing preventative maintenance, as well as identifying and resolving mechanical failures. Prerequisite/Corequisite: ENG 1510; Prerequisite: MAT 1220 or MAT 1590. J occasionally; C occasionally. Master Course Syllabus

Jamestown Campus
Manufacturing Technology Institute - Jamestown 125
Jan 20 – May 13 Wed 1:15 pm – 5:15 pm
Automation & Robotics — 3581
MCT 2220 – 3 credits
Kraig R. Miller

Students will learn the various components, devices, and machines used in modern automation systems along with a study of their related electronics. Students learn the techniques of testing and troubleshooting incorporated in the industrial control setting in a team setting. Students will construct and troubleshoot an automated system including programming and sensors. Prerequisite/Corequisite: ENG 1510. J fall; C spring. Master Course Syllabus

Jamestown Campus
Manufacturing Technology Institute - Jamestown 125
Jan 19 – May 13 Wed 6:00 pm – 10:00 pm
Mechanics of Materials — 3551
MCT 2230 – 4 credits
Timothy R. Griffin

Students will learn stress, strain, and the mechanical properties of materials, tension, compression, torsion, and beams. Topics such as columns, welded and riveted connections, combined stress, stress concentrations, thermal stresses, and pressure vessels are discussed. Prerequisites: MCT 1250, MAT 1600 or higher. J fall. Master Course Syllabus

Jamestown Campus
Manufacturing Technology Institute - Jamestown 125
Jan 19 – May 13 Mon, Wed 8:30 am – 9:45 am
Mechanics of Materials-LAB — 3570
MCT 2230 – 0 credits
John W. Hale

Students will learn stress, strain, and the mechanical properties of materials, tension, compression, torsion, and beams. Topics such as columns, welded and riveted connections, combined stress, stress concentrations, thermal stresses, and pressure vessels are discussed. Prerequisites: MCT 1250, MAT 1600 or higher. J fall. Master Course Syllabus

Jamestown Campus
Fees: $20
Manufacturing Technology Institute - Jamestown 121A
Jan 20 – May 13 Thu 6:30 pm – 9:15 pm
Dimensional Metrology — 3573
MCT 2340 – 2 credits
James A. Heinrich

Studies gain exposure to basic and state of the art requirements for inspection and measurement of machined parts and assemblies. Students will be introduced to the various types of inspection equipment. The students will also have hands-on exposure to metrology via a CMM (Coordinate Measurement Machine) and an optical comparator. Students will hear of state of the art advances in measurement techniques from industry representatives. Prerequisites: MCT 1340 and MAT 1220 or MAT 1590 or higher. Master Course Syllabus

Jamestown Campus
Fees: $20
Manufacturing Technology Institute - Jamestown 125
Jan 21 – May 13 Fri 4:30 pm – 7:15 pm
Dimensional Metrology — 3983
MCT 2340 – 2 credits
James A. Heinrich

Studies gain exposure to basic and state of the art requirements for inspection and measurement of machined parts and assemblies. Students will be introduced to the various types of inspection equipment. The students will also have hands-on exposure to metrology via a CMM (Coordinate Measurement Machine) and an optical comparator. Students will hear of state of the art advances in measurement techniques from industry representatives. Prerequisites: MCT 1340 and MAT 1220 or MAT 1590 or higher. Master Course Syllabus

Jamestown Campus
Fees: $20
Manufacturing Technology Institute - Jamestown 125
Jan 18 – May 13 Fri 1:15 pm – 4:00 pm
Computer Aided Manufacturing — 3575
MCT 2410 – 3 credits
Madi Rathinavelu

Computer-Aided Manufacturing Students will gain exposure to the principles and procedures used in PC based CAD/CAM part programming and manufacturing. Course is based on the use of local industry standard CAM software. The PC-based CAM system will be used to produce complex machined parts from detailed solid models on advanced CNC machine tools. Prerequisites: MCT 1380, MCT 2280 and MCT 2300.J spring. Master Course Syllabus

Jamestown Campus
Fees: $20
Manufacturing Technology Institute - Jamestown 132
Jan 19 – May 13 Wed 5:30 pm – 9:30 pm
Manufacturing Process I — 3576
MCT 2420 – 3 credits
Timothy W. Piazza

Students will learn traditional manufacturing processes. Topics include processes such as casting, hot and cold working, injection molding, powdered metallurgy and finishing, as well as MTL props and their effect on the manufacturing process, and lean manufacturing. Labs consist of tours of traditional manufacturing plants and a project which requires students to create a small factory that uses new manufacturing techniques. Emphasis of the project is on quality, reduced work in process, and the team approach. Prerequisites: MCT 1280, MCT 1380, and sophomore standing in a technology program. J spring. Master Course Syllabus

Jamestown Campus
Manufacturing Technology Institute - Jamestown 113
Jan 24 – May 13 Wed 4:05 pm – 5:20 pm
Manufacturing Process I-LAB — 3577
MCT 2420 – 0 credits
Timothy W. Piazza

Students will learn traditional manufacturing processes. Topics include processes such as casting, hot and cold working, injection molding, powdered metallurgy and finishing, as well as MTL props and their effect on the manufacturing process, and lean manufacturing. Labs consist of tours of traditional manufacturing plants and a project which requires students to create a small factory that uses new manufacturing techniques. Emphasis of the project is on quality, reduced work in process, and the team approach. Prerequisites: MCT 1280, MCT 1380, and sophomore standing in a technology program. J spring. Master Course Syllabus

Jamestown Campus
Fees: $20
Manufacturing Technology Institute - Jamestown 113
Jan 24 – May 13 Mon 4:05 pm – 7:20 pm