Information about Spring 2021 at JCC

Credit Course Schedules

Mechanical Technology - Spring 2021

In-person
Classes meet in person on campus; specific days/times/location
Online - Asynchronous
Classes meet fully online; no specific days/times/locations
Online - Synchronous (Zoom)
Classes meet via Zoom or other resource; specific days/times
Hybrid - Online Asynchronous & Online Synchronous (Zoom)
A portion of the classes meet synchronous via Zoom or other resource and a portion is asynchronous online; there will be some specific days/times
Hybrid - Online & In-person
A portion of the classes meet in person on campus and a portion is asynchronous or synchronous online; there will be some specific days/times/locations
Hybrid - Online Asynchronous & In-person
Classes meet in both asynchronous online and in-person modes; specific meeting times and locations for in-person portions of classes are listed with each course
Hybrid - Online Synchronous (Zoom) & In-person
Classes meet in both synchronous online (zoom) and in-person modes; specific meeting times and locations are listed with each course
Applied Pneumatics&Hydraulics — 3237
MCT 1210 – 3 credits
Peter L. Williams

Students will be introduced to the basics of hydraulic and pneumatic machinery. They will study the basic components of these systems, such as pumps, valves, and actuators. This course will include a combination of laboratory activities and computer-based simulations. Students will also discuss safety standards for pneumatic and hydraulic systems. No requisites. J spring. Master Course Syllabus

Jamestown Campus
Jan 29 – May 14 Fri 8:00 am – 12:00 pm
Engineering Drawing w/AutoCAD — 3776
MCT 1240 – 4 credits
Timothy R. Griffin

Students will focus on engineering drawing fundamentals, incorporating both manual and computer-aided drafting. Topics include free-hand sketching, principles of applied geometry, orthographic projections, dimensioning, section views, pictorials, conventional drawing practices, standards, tolerancing, and an introduction to 2-D wire frame software such as AutoCAD. Students will create and modify CAD geometry, text, and dimensions. No requisites. J fall. Master Course Syllabus

Cattaraugus County Campus
SUNY Learning Network - Jamestown ZOOM
Jan 25 – May 14 Mon 12:50 pm – 2:30 pm
Jan 25 – May 14 Wed 12:50 pm – 2:30 pm
Engineering Drawing w/AutoCAD — 3781
MCT 1240 – 4 credits
Timothy R. Griffin

Students will focus on engineering drawing fundamentals, incorporating both manual and computer-aided drafting. Topics include free-hand sketching, principles of applied geometry, orthographic projections, dimensioning, section views, pictorials, conventional drawing practices, standards, tolerancing, and an introduction to 2-D wire frame software such as AutoCAD. Students will create and modify CAD geometry, text, and dimensions. No requisites. J fall. Master Course Syllabus

Jamestown Campus
Jan 25 – May 14 Mon, Wed 12:50 pm – 2:30 pm
Statics for Technology — 3238
MCT 1250 – 3 credits
Timothy R. Griffin

Students will study rigid body mechanics including forces, force systems, their resultants, and conditions for equilibrium (including friction). Topics include equivalent force systems, equilibrium of rigid bodies, and structural mechanics (trusses, frames, beams, properties of areas, and volumes). Prerequisite: PHY 1250; Prerequisite/Corequisite: MAT 1590 or higher. J spring. Master Course Syllabus

Jamestown Campus
Jan 26 – May 14 Tue, Thu 10:00 am – 11:15 am
CNC/Machine Tools — 3239
MCT 1280 – 3 credits
Jeff P. Teluk

Students will learn the programming and operation of Computer Numerically Controlled (CNC) machine tools. Manual programming of two and three axis mills and lathes using canned cycles will be covered. Topics discussed will include CNC machine components, absolute and incremental programming, preparatory functions (G-codes), miscellaneous functions (M codes), work piece offsets, tool length offsets, cutter compensation and cutting tools and workholding methods for CNC. Lab projects provide hands-on experience for students on CNC controllers. Prerequisite: MCT 1270. J spring. Master Course Syllabus

Jamestown Campus
Jan 25 – May 14 Wed 1:15 pm – 5:15 pm
CNC/Machine Tools — 3240
MCT 1280 – 3 credits
Jeff P. Teluk

Students will learn the programming and operation of Computer Numerically Controlled (CNC) machine tools. Manual programming of two and three axis mills and lathes using canned cycles will be covered. Topics discussed will include CNC machine components, absolute and incremental programming, preparatory functions (G-codes), miscellaneous functions (M codes), work piece offsets, tool length offsets, cutter compensation and cutting tools and workholding methods for CNC. Lab projects provide hands-on experience for students on CNC controllers. Prerequisite: MCT 1270. J spring. Master Course Syllabus

Jamestown Campus
Jan 26 – May 14 Tue 1:15 pm – 5:15 pm
CNC/Machine Tools — 3692
MCT 1280 – 3 credits
Dan Putzstuck

Students will learn the programming and operation of Computer Numerically Controlled (CNC) machine tools. Manual programming of two and three axis mills and lathes using canned cycles will be covered. Topics discussed will include CNC machine components, absolute and incremental programming, preparatory functions (G-codes), miscellaneous functions (M codes), work piece offsets, tool length offsets, cutter compensation and cutting tools and workholding methods for CNC. Lab projects provide hands-on experience for students on CNC controllers. Prerequisite: MCT 1270. J spring. Master Course Syllabus

Cattaraugus County Campus
Jan 25 – May 14 Wed 5:30 pm – 9:30 pm
Machine Tool Tech. II — 3242
MCT 1300 – 3 credits
Jeff P. Teluk

Students will gain exposure to setting up and running manual machine tools such as lathes, mills, and drill presses. In this course, the students will concentrate on more hands-on applications of set-up and machining of more complex parts using the manual equipment in the MTI lab. Prerequisites: MCT 1240, 1270; Eligibility: MAT 1210 or higher. J spring. Master Course Syllabus

Jamestown Campus
Jan 26 – May 14 Tue, Thu 8:00 am – 8:25 am
Machine Tool Tech II-LAB — 3244
MCT 1300 – 0 credits
Jeff P. Teluk

Students will gain exposure to setting up and running manual machine tools such as lathes, mills, and drill presses. In this course, the students will concentrate on more hands-on applications of set-up and machining of more complex parts using the manual equipment in the MTI lab. Prerequisites: MCT 1240, 1270; Eligibility: MAT 1210 or higher. J spring. Master Course Syllabus

Jamestown Campus
Jan 26 – May 14 Tue, Thu 8:30 am – 11:15 am
Machine Tool Tech. II — 3693
MCT 1300 – 3 credits
Dan Putzstuck

Students will gain exposure to setting up and running manual machine tools such as lathes, mills, and drill presses. In this course, the students will concentrate on more hands-on applications of set-up and machining of more complex parts using the manual equipment in the MTI lab. Prerequisites: MCT 1240, 1270; Eligibility: MAT 1210 or higher. J spring. Master Course Syllabus

Cattaraugus County Campus
Jan 26 – May 14 Tue, Thu 5:30 pm – 5:55 pm
Machine Tool Tech. II-LAB — 3694
MCT 1300 – 0 credits
Dan Putzstuck

Students will gain exposure to setting up and running manual machine tools such as lathes, mills, and drill presses. In this course, the students will concentrate on more hands-on applications of set-up and machining of more complex parts using the manual equipment in the MTI lab. Prerequisites: MCT 1240, 1270; Eligibility: MAT 1210 or higher. J spring. Master Course Syllabus

Cattaraugus County Campus
Jan 26 – May 14 Tue, Thu 6:00 pm – 8:45 pm
Manufacturing Drawings & GD&T — 3245
MCT 1340 – 4 credits
Timothy R. Griffin

Students will gain further exposure to actual manufacturing drawings and other information provided. The first part of the course will cover the ability to read, interpret, and construct manufacturing drawings. The second part will introduce the students to geometric tolerance and dimensioning. Prerequisite: MCT 1240; Eligibility: MAT 1210 or higher.. J spring. Master Course Syllabus

Jamestown Campus
Jan 25 – May 14 Mon 2:40 pm – 4:20 pm
SUNY Learning Network - Jamestown ZOOM
Jan 25 – May 14 Wed 2:40 pm – 4:20 pm
Manufacturing Drawings & GD&T — 3782
MCT 1340 – 4 credits
Timothy R. Griffin

Students will gain further exposure to actual manufacturing drawings and other information provided. The first part of the course will cover the ability to read, interpret, and construct manufacturing drawings. The second part will introduce the students to geometric tolerance and dimensioning. Prerequisite: MCT 1240; Eligibility: MAT 1210 or higher.. J spring. Master Course Syllabus

Cattaraugus County Campus
Jan 25 – May 14 Mon, Wed 2:40 pm – 4:40 pm
Technology Internship I — 3246
MCT 2010 – 3 credits
Jeff P. Teluk

Students receive on-the-job experience consisting of 135 hours of supervised activity in a local business or industry. Students work in conjunction with a faculty mentor and a supervisor at the job site. All guidelines in the original college internship policy will be followed. Prerequisite: completion of at least 12 college-level credits with a GPA of 2.0 or better. J occasionally. Master Course Syllabus

Jamestown Campus
Jan 26 – May 14 TBD
Mechanics of Materials — 3247
MCT 2230 – 4 credits
Timothy R. Griffin

Students will learn stress, strain, and the mechanical properties of materials, tension, compression, torsion, and beams. Topics such as columns, welded and riveted connections, combined stress, stress concentrations, thermal stresses, and pressure vessels are discussed. Prerequisites: MCT 1250, MAT 1600 or higher. J fall. Master Course Syllabus

Jamestown Campus
Jan 26 – May 14 Tue, Thu 11:30 am – 12:45 pm
Mechanics of Materials-LAB — 3248
MCT 2230 – 0 credits
John W. Hale

Students will learn stress, strain, and the mechanical properties of materials, tension, compression, torsion, and beams. Topics such as columns, welded and riveted connections, combined stress, stress concentrations, thermal stresses, and pressure vessels are discussed. Prerequisites: MCT 1250, MAT 1600 or higher. J fall. Master Course Syllabus

Jamestown Campus
Jan 28 – May 14 Thu 6:30 pm – 9:15 pm
Dimensional Metrology — 3249
MCT 2340 – 2 credits
James A. Heinrich

Studies gain exposure to basic and state of the art requirements for inspection and measurement of machined parts and assemblies. Students will be introduced to the various types of inspection equipment. The students will also have hands-on exposure to metrology via a CMM (Coordinate Measurement Machine) and an optical comparator. Students will hear of state of the art advances in measurement techniques from industry representatives. Prerequisites: MCT 1340 and MAT 1220 or MAT 1590 or higher. Master Course Syllabus

Jamestown Campus
Jan 29 – May 14 Fri 4:30 pm – 7:15 pm
Advanced Solid Modeling — 3697
MCT 2380 – 3 credits
Richard J. Fontes

Students will extend their knowledge by using the parametric solid modeler in industrial design application. Skills are developed to support applications in the area of feature patterns, molded and cast parts, sheet metal applications, lofting, and sweeps. Assembly modeling and editing is covered as well as detailing of parts and assemblies. Links to other applications such as publication bill of materials, CAM, analysis package, and other CAD systems are also featured. Prerequisite: MCT 1380. Master Course Syllabus

SUNY Learning Network - Jamestown ZOOM
Jan 25 – May 14 Mon 6:30 pm – 9:15 pm
Computer Aided Manufacturing — 3251
MCT 2410 – 3 credits
Madi Rathinavelu

Computer-Aided Manufacturing Students will gain exposure to the principles and procedures used in PC based CAD/CAM part programming and manufacturing. Course is based on the use of local industry standard CAM software. The PC-based CAM system will be used to produce complex machined parts from detailed solid models on advanced CNC machine tools. Prerequisites: MCT 1380, MCT 2280 and MCT 2300.J spring. Master Course Syllabus

Jamestown Campus
Jan 25 – May 14 Wed 6:00 pm – 10:00 pm
Manufacturing Process I — 3254
MCT 2420 – 3 credits
Timothy W. Piazza

Students will learn traditional manufacturing processes. Topics include processes such as casting, hot and cold working, injection molding, powdered metallurgy and finishing, as well as MTL props and their effect on the manufacturing process, and lean manufacturing. Labs consist of tours of traditional manufacturing plants and a project which requires students to create a small factory that uses new manufacturing techniques. Emphasis of the project is on quality, reduced work in process, and the team approach. Prerequisites: MCT 1280, MCT 1380, and sophomore standing in a technology program. J spring. Master Course Syllabus

Jamestown Campus
Jan 25 – May 14 Mon 5:30 pm – 6:50 pm
Manufacturing Process I-LAB — 3255
MCT 2420 – 0 credits
Timothy W. Piazza

Students will learn traditional manufacturing processes. Topics include processes such as casting, hot and cold working, injection molding, powdered metallurgy and finishing, as well as MTL props and their effect on the manufacturing process, and lean manufacturing. Labs consist of tours of traditional manufacturing plants and a project which requires students to create a small factory that uses new manufacturing techniques. Emphasis of the project is on quality, reduced work in process, and the team approach. Prerequisites: MCT 1280, MCT 1380, and sophomore standing in a technology program. J spring. Master Course Syllabus

Jamestown Campus
Jan 25 – May 14 Mon 7:00 pm – 10:00 pm